LIFT ARM AND STABILIZER
LIFT ARM AND STABILIZER
95 products
Showing 49 - 72 of 95 products
Display
View
FNB c/o YERIK INTERNATIONAL
CAT 2 LIFT ARM BALL-OLIVER
SKU: 873-246
Category 2 - Oliver Lift Arm Replacement Ball - Replaces Oliver 104591A - Fits all models with Claw Type Lift Arms - 1 3/4" thru bore - Zinc plated.
In stock, 76 units
Category 2 - Oliver Lift Arm Replacement Ball - Replaces Oliver 104591A - Fits all models with Claw Type Lift Arms - 1 3/4" thru bore - Zinc plated.
Sale price$7.66
FNB c/o SPENCO ENGINEERING
SPRING ASSEMBLY
SKU: C5NNN557B
Spring, ball retainer. For dual-category lift arms.
In stock, 35 units
Spring, ball retainer. For dual-category lift arms.
Sale price$1.86
FNB c/o YERIK INTERNATIONAL
CAT 2 LIFT ARM BALL-FD NRW
SKU: 873-247
Category 2 (Narrow) - Ford Lift Arm Replacement Ball - Replaces Ford C5NN557B - Fits 3000, 4000, 5000 - 1 1/8" ID, 1-3/8" thru bore.
In stock, 193 units
Category 2 (Narrow) - Ford Lift Arm Replacement Ball - Replaces Ford C5NN557B - Fits 3000, 4000, 5000 - 1 1/8" ID, 1-3/8" thru bore.
Sale price$7.53
FNB c/o CANSA DIS TICARET
LOW LINK PIVOT
SKU: 181229M5
Pivot shaft for lower link. Threaded ends 5/8" NF and 5/8" NF, 5-1/4" OAL.
Only 5 units left
Pivot shaft for lower link. Threaded ends 5/8" NF and 5/8" NF, 5-1/4" OAL.
Sale price$15.08
FNB c/o SPENCO ENGINEERING
BALL SOCKET LEFT HAND CAT II
SKU: 184462M92
Lift arm end, left hand, category II, 1-1/8" pin hole.
Only 2 units left
Lift arm end, left hand, category II, 1-1/8" pin hole.
Sale price$43.54
FNB c/o YERIK INTERNATIONAL
LIFT ARM BUSHING-CATEGORY 3-2
SKU: 873-3013
3.25" Long Lift Arm Reducing Bushing - Zinc plated.
In stock, 485 units
3.25" Long Lift Arm Reducing Bushing - Zinc plated.
Sale price$3.60
FNB c/o SPENCO ENGINEERING
BALL SOCKET RIGHT HAND CAT II
SKU: 184461M92
Lift arm end, right hand, category II, 1-1/8" pin hole.
Only 4 units left
Lift arm end, right hand, category II, 1-1/8" pin hole.
Sale price$43.54
FNB c/o CANSA DIS TICARET
CLIP FOR BALL
SKU: 1860936M1
Clip, lower lift arm, use with 191114M91, 886428M1 and 886429M1 lift arm balls.
In stock, 10 units
Clip, lower lift arm, use with 191114M91, 886428M1 and 886429M1 lift arm balls.
Sale price$1.14
FNB c/o GRIPWEL FASTENERS
CATEGORY 2 LIFT ARM BALL-FORD
SKU: 873-244
Category 2 - Ford Lift Arm Replacement Ball - Fits Ford 3000, 4000, & 5000 - 1 3/4" thru bore - Zinc plated.
In stock, 63 units
Category 2 - Ford Lift Arm Replacement Ball - Fits Ford 3000, 4000, & 5000 - 1 3/4" thru bore - Zinc plated.
Sale price$7.75
FNB c/o YERIK INTERNATIONAL
LIFT ARM REPLACEMENT BALL FOR FORD - CATEGORY 1
SKU: 873-243
In stock, 110 units
Sale price$7.24
FNB c/o GRIPWEL FASTENERS
BALL AND SOCKET WELD-ON
SKU: BJ5088
Lift arm ball joint, weld-on, 7/8" bore. Pack qty 2.
In stock, 34 units
Lift arm ball joint, weld-on, 7/8" bore. Pack qty 2.
Sale price$22.95
O.J. MACHINE WORKS
BUSHING LIFT ARM
SKU: 180859M1
Bushing, for lift arm eyebolt assembly 180856M1. 7/16" ID, 5/8"OD, 1-1/2" long.
In stock, 802 units
Bushing, for lift arm eyebolt assembly 180856M1. 7/16" ID, 5/8"OD, 1-1/2" long.
Sale price$2.72
O.J. MACHINE WORKS
LIFT ARM BUSH
SKU: 491050M2
Stabilizer bushing.
In stock, 7 units
Stabilizer bushing.
Sale price$3.55
FNB c/o YERIK INTERNATIONAL
LIFT ARM BUSHING WITH HOLE CAT 2-3
SKU: 873-3010
Has hole for 7/16" Lynch Pin
In stock, 690 units
Has hole for 7/16" Lynch Pin
Sale price$3.07
FNB c/o YERIK INTERNATIONAL
LIFT ARM BUSHING CATEGORY 2-3
SKU: 873-3009
1-1/8" ID X 1-7/16" OD X 1-3/4" long. Fits all Category 2 Draw Pins - Zinc plated.
In stock, 1784 units
1-1/8" ID X 1-7/16" OD X 1-3/4" long. Fits all Category 2 Draw Pins - Zinc plated.
Sale price$2.76
FNB c/o YERIK INTERNATIONAL
SLEEVE BUSHING - CATEGORY 1
SKU: 873-351
7/8 Inch ID X 1-1/8 Inch OD X 1-3/4 Inch long. Fits all Category 1 Draw Pins - Zinc plated
In stock, 3454 units
7/8 Inch ID X 1-1/8 Inch OD X 1-3/4 Inch long. Fits all Category 1 Draw Pins - Zinc plated
Sale price$1.94
FNB c/o GRIPWEL FASTENERS
COMBINATION BALL AND SOCKET
SKU: SBJ2
Lift Arm Ball Socket, Cat 1&2, Heavy Duty Duty, 7/8"&1-1/8" ID, 1-3/4" bore length, 1-3/16" sleeve width, 2-3/4" OD, Zinc Plated finish.Lift arm combination ball joint. For 7/8" or 1-1/8" pins. Category I or II. 1/4" thick race for light arms.
In stock, 604 units
Lift Arm Ball Socket, Cat 1&2, Heavy Duty Duty, 7/8"&1-1/8" ID, 1-3/4" bore length, 1-3/16" sleeve width, 2-3/4" OD, Zinc Plated finish.Lift arm combination ball joint. For 7/8" or 1-1/8" pins. Category I or II. 1/4" thick race for light arms.
Sale price$35.48
FNB c/o YERIK INTERNATIONAL
LIFT ARM BUSHING CAT 1-0
SKU: 873-828
5/8" ID X 7/8" OD X 1-3/8" long. Fits all Category 0 Draw Pins - Zinc plated.
In stock, 104 units
5/8" ID X 7/8" OD X 1-3/8" long. Fits all Category 0 Draw Pins - Zinc plated.
Sale price$1.85
TISCO - DASH
CAT I BALL
SKU: 886428M1WC
Lift arm ball, category I, use in 191114M91, 886431M1 and 1869289M91 lift arms.
In stock, 50 units
Lift arm ball, category I, use in 191114M91, 886431M1 and 1869289M91 lift arms.
Sale price$10.44
FNB c/o GRIPWEL FASTENERS
LIFT ARM BALL FOR CLAW-TYPE ARMS
SKU: 105967A
Lower lift arm ball, special ball for models with claw type arms. Category I, 7/8" hole.
In stock, 27 units
Lower lift arm ball, special ball for models with claw type arms. Category I, 7/8" hole.
Sale price$12.55
FNB c/o GRIPWEL FASTENERS
HD ADJUSTABLE STABILIZER ARM
SKU: 873-628
Category 1 Heavy Duty Adjustable (Right Hand or Left Hand) - One piece forged ends - no welds to break. Adjusts from 27 1/2" to 35"; 7/8" pin holes; 7/8" threads.
In stock, 51 units
Category 1 Heavy Duty Adjustable (Right Hand or Left Hand) - One piece forged ends - no welds to break. Adjusts from 27 1/2" to 35"; 7/8" pin holes; 7/8" threads.
Sale price$35.79
SPECIAL PRODUCTS COMPANY
STABILIZER ARM - RIGHT HAND FOR FORD
SKU: 873-6252
Stabilizer Arm - Right Hand - Fits Ford 2000, 3000. Made of 3/8" x 2" heat treated high carbon steel; 7/8" pin holes on 31 5/8" centers.
Sold out
Stabilizer Arm - Right Hand - Fits Ford 2000, 3000. Made of 3/8" x 2" heat treated high carbon steel; 7/8" pin holes on 31 5/8" centers.
Sale price$25.35
FNB c/o GRIPWEL FASTENERS
COMBINATION BALL AND SOCKET - HEAVY RACE
SKU: SBJ3
Lift Arm Ball Socket, Cat 1&2, Extra Heavy Duty Duty, 7/8"&1-1/8" ID, 1-3/4" bore length, 1-3/8" sleeve width, 3-1/8" OD, Black Oxide finish.Lift arm combination ball joint. For 7/8" or 1-1/8" pins. Category I or II. 7/16" thick race for heavy lift arms.
Only 2 units left
Lift Arm Ball Socket, Cat 1&2, Extra Heavy Duty Duty, 7/8"&1-1/8" ID, 1-3/4" bore length, 1-3/8" sleeve width, 3-1/8" OD, Black Oxide finish.Lift arm combination ball joint. For 7/8" or 1-1/8" pins. Category I or II. 7/16" thick race for heavy lift arms.
Sale price$34.93
FNB c/o GRIPWEL FASTENERS
RIGHT HAND STABILIZER ARM
SKU: C5NN454C
Link, stabilizer, RH. Cat. I only. Tractors: 2000, 4110 (1965-1975), 3000 (except 3550, 11/1970-1975), 2600, 3600 (1975-1981).
In stock, 17 units
Link, stabilizer, RH. Cat. I only. Tractors: 2000, 4110 (1965-1975), 3000 (except 3550, 11/1970-1975), 2600, 3600 (1975-1981).
Sale price$55.64